There are wires in wireless networks? Yes, and probably more than you think. For an office’s wireless setup, there are wires and cables that need to be run throughout the entire office. In this post, we will be talking about the basics that are required in order to prepare and execute the pathways and cabling in an office setting.
Where and how an access point (AP) is hung is a simple process that requires planning and logical decision making based on a handful of factors, including the surface material, the mounting type of the access point, and the neighboring entities. Using a combination of proper mounting equipment and precise placement allows for an access point to perform to the best of its ability.
While there are many things that can affect wireless local area network (WLAN) operation, the placement of wireless access points (AP) can be one of the most significant factors in performance. Good AP placement must provide not only adequate coverage for all clients on a network, but must also provide adequate throughput, good connectivity, and minimal interference.
With the increase in low power devices, such as tablets and cell phones, and the increasing need for roaming service over nomadic use, efficient placement is critical to an operating wireless network. Poor placement of access points can result in numerous issues including low data rates, signal bleeding, bad roaming coverage, and even overspending on additional APs.